Packard 1940-1950 Parts
Select your vehicle
Packard Literature Reprints
1940-1950 Packard Parts
1948-54 Packard Parts
1955-1956 Packard Parts
110-120 Packard Parts
Packard Senior Parts
Packard Ultramatic Transmission
Rebuilding Kits:
1949-1950
1951-1954
1955-1956
Quick Links
Packard Order Form
Packard Home Page
Kanter Main Website
Kanter Auto Products - 76 Monroe St - Boonton NJ 07005 - USA
Telephone: 800-526-1096 or 973-334-9575
- 1940-42 SUPER EIGHT 160
- 1940-42 CUSTOM SUPER EIGHT 180
- 1946-47 SUPER EIGHT
- 1946-47 CUSTOM SUPER EIGHT
- 1948-50 CUSTOM EIGHT
This price list contains more than a thousand of the most needed parts for the repair
and restoration of this series of Packards from 1940 to 1950. We carry many more
parts than those listed here. If you need a Packard part not on this list, a phone call
or a letter to our Packard Department is all that is needed for you to find out if we
can fill your order.
This list covers all Packards with the eight cylinder 356 cubic inch displacement engine
from 1940 to 1950. This engine has nine main bearings and hydraulic valve lifters.
It can be identified by noting that the exhaust pipe is held to the exhaust manifold by
four bolts and nuts.
Do It Once and Do It Right!® then enjoy your car every time you drive it with the
confidence that you have invested in the finest parts from Kanter Auto Products.
Lifetime Warranty Kanter Auto Products warrants that each item we sell is free
from defects in workmanship and materials for as long as you own your car.
Add 15% for postage and handling in continental U.S.
($8.00 minimum, $60.00 maximum)
To Order:
State make, year, model, body style,
and serial number on our order form.
---------
1. How to order Packard Parts on-line.
2. Look thru this Page and write down the Group #, description and price of the parts that you want to order.
3. Then click on this link to go to our Order Form
PACKARD HOME PAGE
Please Note:To request our current printed PACKARD catalog please click here.
Refer to group number in your illustrated Packard Parts Book
GROUP INDEX
Group 0 - HOOD (bonnet)
Group 1 - BRAKE
Group 2 - BUMPER
Group 3 - CLUTCH and TRANSMISSION
Group 3.5 - ULTRAMATIC
Group 4 - ELECTRICAL
Group 5 - ENGINE
Group 6 - EXHAUST
Group 7 - FENDERS AND RUNNING BOARD
Group 9 - FUEL
Group 10 - INSTRUMENTS
Group 11 - RADIATOR
Group 12 - REAR AXLE
Group 13 - SHOCK ABSORBER and STABILIZER
Group 14 - SPRINGS
Group 15 - STEERING and SUSPENSION
Group 17 - TRUNK RACK
Group 18 - UNIVERSAL JOINT
Group 19 - WHEELS
Group 30 & 31 - BODY EQUIPMENT
Please inquire for any Hood parts not listed below
GROUP
0.000 ---- Hood good used, all models - INQUIRE
0.0015 ---- Hood bumper rubber set of 10 pieces, all 1941 Except Clipper $35.00
0.0015 ---- Hood bumper rubber set of 18 pieces for front and sides 1941-47
Clipper $58.00
0.0015 ---- Hood bumper rubber set of 27 pieces for front and sides 1948-50 $55.00
0.0083 ---- Hood handle knob, 1942-47 Clipper, Reproduction, each $40.00
0.00842 ---- Hood lever to firewall round rubber seal, pair, 1942-47 Clipper,
1948-50 all $51.00
0.014 ---- Hood corner (bumper,) front or rear 1940, per pair $45.00
(30.201) Hood lacing kit with rivets 1940 $49.00 1941-42 $25.00
0.030 ---- Center hood molding, 1938-40, reproduction $74.00
0.0335 ---- Hood side molding barb 1941, good used $86.00
0.0335 ---- Top molding barb, 1942-47 Clipper only INQUIRE
0.0345 ---- Hood ornament standard Bail and Feather 1940, good used restorable, from
$87.00 to $145.00
0.0345 ---- Hood ornament standard Bail and Feather 1940, New old stock, from
$175.00 to $265.00
0.0345 ---- Hood ornament, 1940-42 Except Clipper, parts and good used assemblies
INQUIRE
0.0345 ---- Hood ornament, good used, restorable, 1948-40 INQUIRE
0.0347 ---- Top prop rubber rest, 1941-42 Except Clipper, pair $55.00
0.0348 ---- Hood weatherstrip on cowl, 23rd series $26.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
1.000 ---- Cylinder - Master and Wheel cylinder
GROUP
1.000 ---- Cylinder Master and Wheel cylinder
1.0005 ---- Master cylinder (except Commercial chassis and Limo)$155.00
1.0005 ---- Master cylinder Commercial chassis and Limo $185.00 - See Note #1
1.019 ---- Master cylinder repair kit $35.00
(4.1646) ---- Stoplight switch $27.00
1.023 ---- Wheel cylinder, specify front or rear, left or right (Except
Commercial chassis and 2126) $39.00
1.023 ---- Wheel cylinder set of 4 (Except Commercial chassis and 2126) $148.00
1.023 ---- Wheel cylinder, specify front or rear, left or right, Commercial chassis and 2126 $66.00
1.029 ---- Wheel cylinder repair kit, pair, front or rear (2 sides) $16.00
1.100 ---- Hand brake
GROUP
1.105 ---- Handle assembly INQUIRE
1.105 ---- Hand brake rubber grip, 1940 $40.00
1.108 ---- Hand brake front cable $96.00
1.121 ---- Hand brake lever sector (ratchet) assembly, most models available $87.00
1.123 ---- Hand brake rear cable 1940-42 Except Clipper, 2 per car $92.00
1.123 ---- Hand brake rear cable 1942-47 Clipper, 1948-50, 1 per car $129.00
1.200 Brake drum
GROUP
1.200 ---- Brake drum front, reconditioned most models except below $198.00
1.200 ---- Brake drum front, 1940-42 Except Clipper, New $425.00
1.200 ---- Brake drum front, New 2003-06, 2103-06, 2206-33, 2306-33 only $219.00
1.200 ---- Brake drum rear, New 1803-1903 (reconditioned $198.00) $249.00
1.200 ---- Brake drum rear, reconditioned most models except 1803-1903 $175.00
1.200 ---- Brake drum rear, new, 2003-06, 2103-06, 2206-33, 2306-33 only $198.00
1.200 ---- Brake drum, commercial chassis and 2126 INQUIRE
1.300 Pedal
GROUP
1.301 ---- Brake and clutch pedal boot, pair $18.00
1.306 ---- Brake and clutch pedal pad, pair $28.00
1.400 ---- Brake shoe and lining
GROUP
1.400 ---- Brake shoe and lining set for 2 wheels Except Commercial chassis and 2126 $69.00
1.400 ---- Brake shoe and lining set for 2 wheels, Commercial chassis, and 2126
Exchange only $94.00
1.403 ---- Brake hardware kit (2 wheels) $20.00
1.412 ---- Brake lining set - 4 wheels with rivets, Commercial chassis and 2126 $90.00
1.502 ---- Brake backing plate adjusting hole cover set, 4 per car $6.00
1.601 Brake hose
GROUP
1.607 ---- Hydraulic hose (3 used per car) specify front or rear $34.00
1.607 ---- Hydraulic hose clip set (set of 3) $9.90
1.608 ---- Brake line set, stainless steel, most models $319.00
BRAKE OVERHAUL KITS
Master Brake overhaul kits include:
• 4 wheel brake linings with rivets
• 4 wheel cylinder kits
• 3 hoses
• Master cylinder kit
• Front and rear hardware kits
---------------------------
Deluxe Brake overhaul kits include:
• Master cylinder
• 4 wheel brake linings with rivets
• 4 wheel cylinder kits
• 3 hoses
• front and rear hardware kits
GROUP
1.999 ---- Master brake overhaul kit, Except Commercial chassis and 2126 $250.00
1.999 ---- Deluxe brake overhaul kit, Except Commercial chassis and 2126 $445.00
1.999 ---- Master brake overhaul kit for Commercial chassis and 2126 with lining set only $245.00
1.999 ---- Deluxe brake overhaul kit for Commercial chassis and 2126 *Note Shoe and linings are Exchange only. $470.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
BUMPER PARTS ---- Group 2 ----
Please inquire for any Bumper parts not listed below:
GROUP
2.000 ---- Bumper bar front 1948-50 INQUIRE - See Note #2
2.0005 ---- Bumper bar rear section 1948-50, each (Inquire for used) $345.00
2.001 ---- Bumper bar front or rear, 1940-41 Used, Except Clipper $385.00
2.001 ---- Bumper bar front or rear, 1942-47 Clipper $450.00
2.001 ---- Bumper bar front or rear, 1942-47 Clipper, Used $225.00
2.002 ---- Bumper grommets, 1940-42, Except Clipper, pair. Specify front or rear $42.00
2.0050 ---- Bumper guard, front or rear, 1940-42 Except Clipper INQUIRE
2.0050 ---- Bumper guard, front or rear, 1942-47 Clipper, 1948-50 $115.00
2.0055 ---- Front fender outer bumper guard, 1946-47, left or right $225.00
2.0056 ---- Rear fender outer bumper guard, 1946-47, left or right $225.00
2.0058 ---- Rear bumper bracket grommet, 22nd and 23rd series, pair $37.00
2.012 ---- Bumper support bracket, front, left or right, used $98.00
2.013 ---- Bumper support bracket, rear, left or right, used (inquire if equipped with
trunk rack) $98.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
CLUTCH AND TRANSMISSION---- Group 3 ----
Please inquire for any Clutch and Transmission parts not listed below
3.000 Clutch Assembly
GROUP
3.000 ---- Clutch pressure plate, Exchange (or add deposit of $120) $160.00 - See Note #1
3.005 ---- Clutch disc, Exchange (or add deposit of $120) $142.00 - See Note #1
3.100 Clutch Control
GROUP
3.101 ---- Clutch pedal booster spring, 1941-47 Clipper $49.00
3.112 ---- Clutch and brake pedal boot, pair $18.00
3.115 ---- Clutch pedal retracting spring, most models $45.00
3.115 ---- Clutch pedal linkage, springs etc. INQUIRE
3.1166 ---- Clutch and brake pedal pad, pair $28.00
3.118 ---- Clutch throwout bearing lever INQUIRE
3.127 ---- Throwout bearing lever relay rod $39.00
3.148 ---- Throwout bearing, less collar $59.00
3.148 ---- Throwout bearing and Collar assembly, Exchange only $135.00 - See Note #1
3.149 ---- Throwout bearing return spring $20.00
3.1492 ---- Clutch control Electromatic
GROUP
3.14931 ---- Electromatic clutch diaphragm $105.00
3.14955 ---- Electromatic vacuum cylinder cable $85.00
3.1499 ---- Electromatic control valve repair kit $105.00
3.150 ---- Electromatic clutch assemblies, parts, etc. INQUIRE
3.152 ---- Electromatic clutch control valve air cleaner $58.00
3.200 Transmission
GROUP
3.200 ---- Transmission, rebuilt and used assembly. INQUIRE - See Note #2
3.209 ---- Input shaft $210.00
3.2091 ---- Front bearing $45.00
3.2092 ---- Input shaft pilot bearing $29.00
3.214 ---- Countershaft $195.00
3.215 ---- Cluster gear $275.00
3.2155 ---- Cluster gear needle bearing set $29.00
3.218 ---- Cluster gear end plate (hardened washer 2 used per car) $43.00
3.219 ---- Cluster gear thrust washer (2 used per car) $48.00
3.222 ---- Direct drive and second speed clutch gear (Synchro hub) 1939-47 $125.00
3.223 ---- Direct drive and second speed clutch ring, Used only. $255.00
3.2281 ---- Rear bearing, (without overdrive, center bearing with
overdrive) $45.00
3.2281 ---- Rear bearing kit with overdrive $90.00
3.2282 ---- Driving shaft front bearing (caged bearing mounted in input shaft) $78.00
3.2302 ---- Driving shaft rear bushing, 1948-40 $19.00
3.232 ---- Rear seal $25.00
3.234 ---- Low and reverse gear $162.00
3.235 ---- Mainshaft w/o overdrive, Exchange or add $225 deposit $595.00 - See Note #1
3.235(3.403) ---- Mainshaft with overdrive, 1939-47 INQUIRE
3.236 ---- Universal joint flange $125.00
3.245 ---- Gasket set, standard without OD $35.00
3.246 ---- Reverse idler gear $98.00
3.260 Synchronizer
GROUP
3.2635 ---- Synchronizer repair kit, 3 balls, 3 springs $45.00
3.270 Overdrive
Please inquire for any overdrive parts not listed below
GROUP
3.2735 ---- Gasket set, standard with overdrive $42.00
3.282(3.435) ---- Free wheel cam $170.00
3.283 ---- Free wheeling cam and roller retainer assembly, R9 1940-49 (has 0.681"
rollers) $195.00
3.283 ---- Free wheeling cam and roller retainer assembly, R9 (has 0.871" rollers) $309.00
3.284 ---- Free wheel roller set $66.00
3.288 ---- Governor assembly, 1940-47 Exchange, or add $100.00 deposit $347.00 - See Note #1
3.292 ---- Governor switch and cover assembly $175.00
3.294 Overdrive mainshaft
GROUP
3.294 ---- Main shaft assembly $355.00
3.295 ---- Rear overdrive bearing kit (with R11 overdrive $45.00) $90.00
3.297 ---- Rear seal $25.00
3.2971(3.446) ---- Pinion and cage assembly $355.00
3.2975(3.464) ---- Ring gear $123.00
3.2986(3.482) ---- Stationary gear assembly R9 $233.00
3.2986 ---- Stationary gear assembly R11 $145.00
3.2989(3.404) ---- Lockout cable assembly (Overdrive cable) INQUIRE
3.2990 ---- Overdrive knob, 1941-47, Reproduction $45.00
3.2995 ---- Overdrive rear mount, Exchange only $88.00 - See Note #1
3.300 Gearshift
GROUP
3.300 ---- Idler lever to trans rod $65.00
3.311 ---- Shift lever boot $19.00
3.314 ---- (3.340)Gearshift lever knob, 1940 beige or gray (measure thread diameter)
1941-47 Clipper 1948-50 $45.00
3.314 ---- Gearshift lever knob, 1941-42 Except Clipper. $55.00
3.325 ---- Gearshift shaft and housing, 1939-47 INQUIRE
3.328 ---- 1st and reverse gearshift lever (at bottom of gearshift shaft) $55.00
3.329 ---- Direct and 2nd gearshift lever (at bottom of gearshift shaft) $55.00
3.346 ---- Direct and 2nd shaft lever (on transmission cover assembly) $72.00
3.346 ---- 1st and reverse shaft lever (on transmission cover assembly) $72.00
Transmission mount
GROUP
5.16005) ---- Transmission mount, each (2 per car) $74.00
Transmission rebuilding kit
GROUP
3.999 ---- Transmission rebuilding kit w/o overdrive. Includes gaskets, bearings, seal,
sync. kit $155.00
3.999 ---- Transmission rebuilding kit with R9 overdrive $270.00
3.999 ---- Transmission rebuilding kit with R11 overdrive $195.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
Please inquire for any Electrical parts not listed below
Please specify Delco or Autolite System
4.000 ---- Battery
GROUP
4.0001 ---- Battery cable, ground (flat woven wire type) $38.00
4.0003 ---- Battery cable to battery terminal boot $13.00
4.0003 ---- Battery to starter cable $50.00
4.0004 ---- Battery cable to starter solenoid boot $13.00
4.00073 ---- Battery retainer 1942-47 Clipper, 1948-50 hold down $55.00
4.0008 ---- Battery support, 1942-47 Clipper, 1948-50 good used (new Inquire) $155.00
4.0101 Cigar lighter
GROUP
4.0101 ---- Cigar lighter base, most models $49.00
4.01041 ---- Cigar lighter knob 1942-47 Clipper, 1948-50 $55.00
4.0105 ---- Cigar lighter element $32.00
4.0200 ---- Clock
Most clocks available INQUIRE
4.03001 ---- Distributor
specify Autolite or Delco and tag number
GROUP
4.03001 ---- Distributor, rebuilt, Exchange only $145.00 - See Note #1
Access. ---- Tune-up kit: contains points, condenser, cap, rotor, with 10MM plugs $69.00
Access. ---- Tune up kit: contains points, condenser, cap, rotor, 1950 with 14MM
plugs $64.00
4.0305 ---- Points and condenser, original point set $54.00
4.0305 ---- Points and condenser, replacement set $23.00
4.0317 ---- Breaker plate (with points and condenser) most models available $145.00
4.0317 ---- Cap and rotor $38.00
4.0317 ---- Vacuum advance Autolite , Exchange only $155.00 - See Note #1
4.0404 ---- Distributor bushing set (2 bushings) $20.00
4.0540 Electromatic clutch control
Many parts available INQUIRE
4.0600 Gauges
GROUP
4.0600 ---- Gas tank sending unit rebuilt, Exchange only $175.00 - See Note #1
4.0614 ---- Gauges, ammeter, gas, oil 1940-42 Except Clipper INQUIRE
4.0614 ---- Gauges, ammeter, gas, oil, 1942-47 Clipper, 1948-50 $115.00
4.0614 ---- Gauge, temperature 1948-50 $115.00
4.0622 ---- Oil gauge sending unit, 1942-47 Clipper only $60.00
4.0622 ---- Oil gauge sending unit, 1948-50 $39.00
4.0633 ---- Temperature sender 1948-50 INQUIRE
4.07001 Generator
Please specify tag number
GROUP
4.07001 ---- Generator, Autolite NEW, 1942-47 Clipper, 1948-50 Exchange or add $150 deposit
$425.00- See Note #1
4.07001 ---- Generator, rebuilt Exchange or add $175 deposit $240.00 - See Note #1
4.07021 ---- Generator brush set $22.00
4.07021 ---- Generator rebuild kit (brush set, bearing and bushing) $44.00
4.07021 ---- Generator radio noise suppressor $25.00
4.0703 ---- Voltage regulator, replacement $75.00
4.1001 Horn
GROUP
4.1001 ---- Horn assembly used, good working condition, 1940-42 Except Clipper INQUIRE
4.1001 ---- Horn assembly used, good working condition, 1942-47 Clipper, 1948-50 $185.00
4.1016 ---- Horn relay $32.00
4.1022 ---- Horn ring 1942-47 Clipper, 1948-50 (good used $95.00) $165.00
4.1031 ---- Horn button emblem 1942-47 Clipper reproduction $255.00
4.1100 ---- Ignition cables
GROUP
4.1100 ---- Ignition cable set, black cloth covered lacquered set. 8 cylinder $55.00
4.1105 ---- Spark plug 14 MM, Some 23rd series, each $4.00
4.1105 ---- Spark plug 10 MM, each $5.00
4.1203 Ignition coil and switch
GROUP
4.1203 ---- Coil and bracket, Autolite replacement 1940-47, Exchange or add $50.00 deposit
$275.00
4.1203 ---- Coil and bracket, New Old Stock 1940-42 Except Clipper, Exchange or add $50.00
deposit $225.00 - See Note #1
4.1203 ---- Coil and bracket, 1948-50 replacement (NOS Autolite $89.00) $52.00
4.1205 ---- Ignition switch and cable 1940-47 INQUIRE
4.1205 ---- Ignition switch, 1948-50 $111.00
4.12053 ---- Ignition switch bezel, 1948-50 $66.00
4.1206 ---- Ignition switch lock cylinder INQUIRE
4.1207 ---- Ignition switch key blank $7.00
4.1250 ---- Backing light
Note: Backup lights were an Accessory for 1940-1950
GROUP
4.1250 ---- Backup light, 1940, with bumper bar mounting bracket, with PACKARD
script $235.00
4.1250 ---- Backup light, 1941-47, 1948-50 with PACKARD script $195.00
4.1262 ---- Backup light lens, for above backup lights, each $55.00
4.1300 ---- Headlight assembly
GROUP
4.1300 ---- Headlight assembly’s, buckets etc INQUIRE
4.1301 ---- Headlight bucket mounting gasket, 1941-42 Except Clipper, pair $40.00
4.1301 ---- Headlight bucket mounting gasket, 1942-47 Clipper, 1948-50, pair $32.00
4.13025 ---- Headlight sealed beam, 6 volt $35.00
4.1303 ---- Headlight bulb retainer $35.00
4.1311 ---- Headlight plain bezel, primed, 1940, each $48.00
4.1311 ---- Headlight chrome bezel, 1942-47 Clipper, 1948-50 $69.00
4.1312 ---- Headlight bezel rubber gasket, 1940-42 Except Clipper, pair $42.00
4.1328 ---- Headlight dimmer switch $33.00
4.1329 ---- Headlight dimmer switch rubber cap $6.00
4.1335 ---- Headlight switch, rebuilt, 1940-42 Except Clipper, Exchange only
255.00 - See Note #1
4.1335 ---- Headlight switch, 1942-47 Clipper, Exchange or add $125.00 deposit
$175.00 - See Note #1
4.1335 ---- Headlight switch, 1948-50, Exchange or add $95.00 deposit
$213.00 - - See Note #1
NEW Dash knobs 1940, reproduction, each $19.00
NEW Dash knob set 1940-42 Except Clipper model $35.00 ea, 5 piece set $155.00
4.1400 Parking light
GROUP
4.1400 ---- Parking light assembly, parts 1940-47 INQUIRE
4.1400 ---- Parking light assembly 1948-50 $170.00
4.14015 ---- Parking light bulb $6.00
4.14028 ---- Parking light bezel, 1942-47 Clipper $95.00
4.14028 ---- Parking light bezel, 1948-50 $120.00
4.1406 ---- parking light to fender mounting gasket, 1940, pair $36.00
4.1406 ---- Parking light to fender mounting gasket, 1941-42, Except Clipper,
pair $72.00
4.1407 ---- Parking light lens, INQUIRE
4.1600 ---- Tail Light
GROUP
4.1600 ---- Tail light assemblies, INQUIRE
4.1601 ---- Tail light to body gasket, 1940 pair $45.00 1941-42 Except Clipper,
pair $55.00
4.1601 ---- Tail light to body mounting gasket, 1942-47 Clipper with steel
stamped taillight door, pair $74.00
4.1601 ---- Tail light to body mounting gasket, 1946-47 Clipper with die cast
taillight door, pair $89.00
4.1601 ---- Tail light to body mounting gasket, 1948-50, pair $88.00
4.1602 ---- Tail light chrome housing, 23rd series, each $235.00
4.1620 ---- Tail light chrome bezel 1942-47 Clipper, 1948-49 22nd series
(advise plain or
ribbed, and casting number) $115.00
4.1622 ---- Tail light lens, 1941-42 Except Clipper, Plastic reproduction, upper or lower each $95.00
4.1622 ---- Tail light lens, 1942-47 Clipper, 1948-49 22nd series (advise plain
or ribbed, and casting number) $40.00
4.1622 ---- Tail light lens, 1949-50 23rd series, each $95.00
4.1646 ---- Stoplight switch $27.00
4.1800 ---- Starter
Please specify tag number
GROUP
4.1800 ---- Starter rebuilt, Exchange or add $150.00 deposit (Some models exchange only)
at end of list $375.00 - See Note #1
4.1800 ---- Starter New Old Stock, Exchange or add $150.00 deposit $425.00
4.18004 ---- Bendix drive, Exchange only $175.00 - See Note #1
4.18004 ---- Brush set $22.00
4.18004 ---- Rebuild kit, contains: brush set and 2 bushings (where applicable) $48.00
4.18004 ---- Solenoid, rebuilt, Exchange only $285.00
4.21082 ---- Steering directional signal
GROUP
4.21082 ---- Turn signal switch, 1942-47 Clipper, 1948-50 Exchange or add $50.00 deposit
$155.00 - See Note #1
4.21086 ---- Turn signal flasher $37.00
4.210925 ---- Turn signal lever knob, 1942-47 Clipper, 1948-50, Ivory, reproduction $24.00
4.2200 Overdrive
GROUP
4.2200 ---- Overdrive kick down switch 1940-48 with R9 overdrive, Exchange or add 50.00
deposit (1948-50 R11 $55) $95.00
4.2216 ---- Overdrive relay assembly, Delco, with 6 terminals INQUIRE
4.2223 ---- Overdrive lockout switch $64.00
4.2228 ---- Overdrive solenoid rebuilt R9, Exchange only $255.00 - See Note #1
4.2228 ---- Overdrive solenoid R11, Exchange or add $85.00 deposit $255.00 - See Note #1
4.2231 ---- Overdrive solenoid shaft seal $13.20
4.2320 ---- Wiring harnesses
4.2320 ---- Wiring harnesses , Most models available INQUIRE
Electrical accessories and Kits
GROUP
Access. ---- Driving (clear )or Fog (amber) lights 5" or 6", 6
volt, pair, with brackets, Packard crest, switch and wiring $189.00
Access. ---- Spotlight, left or right, specify 5" or 6" 6 volt,
with Packard crest and bracket, each $259.00
4.999 ---- Tune-up kit: contains points, condenser, cap, rotor, with 10MM plugs $69.00
4.999 ---- Tune up kit: contains points, condenser, cap, rotor, 23rd series with
14MM plugs $64.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
Please inquire for any Engine parts not listed below
GROUP
5.0000 ---- Used engines, blocks INQUIRE - See Note #2
5.0100 ---- Camshaft
GROUP
5.0100 ---- Camshaft reconditioned, Exchange only - See Note #1 $220.00 - See Note #1
5.0101 ---- Camshaft bearing set $145.00
5.0105 ---- Timing chain $79.00
5.0111 ---- Timing chain and gear set (3 pieces) $135.00
5.0200 Connecting rod
GROUP
5.0200 ---- Connecting rod, Exchange or add $50 deposit $87.00 - See Note #1
5.0201 ---- Connecting rod bolt INQUIRE
5.0203 ---- Connecting rod bearing, Std. .001",.002", .010" to .040" $27.00
5.0204 ---- Connecting rod piston pin bushing, pair $7.00
5.0400 ---- Crankshaft
GROUP
5.0400 ---- Crankshaft new and used - INQUIRE - See Note #2
5.0401 ---- Main bearing set standard or .001", .002", .010" and .030" oversize $275.00
5.0408 ---- Crankshaft rear seal set (original style 2 wood sticks and 2 rope wicks) $22.00
5.0500 ---- Cylinder Block and Head
GROUP
5.0500 ---- Freeze plug set $26.00
5.0503 ---- Cylinder head, Reconditioned $725.00
5.0503 ---- Head stud, each $6.00
5.0503 ---- Head stud set, 38 studs $152.00
5.0503 ---- Head nut and washer, plain, replacement, pair $4.00
5.0503 ---- Head chrome acorn nut and washer, pair $8.00
5.0503 ---- Head chrome acorn nut and washer set, 38 pair $170.00
5.0504 ---- Head gasket, New manufacture copper head gasket $85.00
5.0506 ---- Thermostat, original new old stock, 148 or 160 degrees $38.00
5.0506 ---- Thermostat, replacement, 180 degrees $11.00
5.0507 ---- Thermostat retainer $35.00
5.0508 ---- Thermostat housing INQUIRE
5.0509 ---- Thermostat housing gasket $3.00
5.0518 ---- Road breather tube INQUIRE
5.0531 ---- Water distribution tube, brass, INQUIRE
5.0600 ---- Flywheel
GROUP
5.0600 ---- Flywheel good used, most models available $225.00
5.0602 ---- Flywheel ring gear $240.00
5.0604 ---- Flywheel housing lower cover, good used $99.00
5.0700 ---- Gasket set
GROUP
5.0700 ---- Engine overhaul gasket set, complete, includes every engine
gasket, fresh stock (copper head gasket) $170.00
5.0800 Timing gear cover
GROUP
5.0800 ---- Timing gear cover good used (inquire for NOS) $75.00
5.0801 ---- Timing gear cover gasket and cork seal set $32.00
5.0803 ---- Timing gear cover front oil seal and retainer $33.00
5.0805 ---- Timing indicator good used $49.00
5.0900 Manifold
GROUP
5.0900 ---- Exhaust manifold - INQUIRE - See Note #2
5.0900 ---- Exhaust manifold to block stud and nut set $44.00
5.0902 ---- Manifold gasket set replacement(3 manifold to block segments, carburetor
and exhaust flange gasket) $37.00
5.0902 ---- Manifold gasket set original $90.00
5.0904 ---- Exhaust manifold heat control thermostat spring $35.00
5.0906 ---- Exhaust manifold heat riser parts INQUIRE
5.0920 ---- Intake manifold INQUIRE
5.0920 ---- Intake to exhaust manifold gasket (hot spot gasket) $15.00
(6.108) ---- Exhaust pipe flange gasket $8.00
5.1000 Oil filler and filter
GROUP
5.1001 ---- Oil fill cap 1940-42 Except Clipper, replacement $65.00
5.1001 ---- Oil fill cap 1942-47 Clipper, 1948-50 $65.00
5.1009 ---- Oil filter accessory unit, good used $99.00
5.1009 ---- Oil filter accessory unit, new (less steel connecting lines and bracket) $245.00
5.10098 ---- Oil filter cartridge Please give filter cartridge number and/or size $22.00
5.1100 Oil pan
GROUP
5.1100 ---- Oil pan good used INQUIRE
5.1101 ---- Oil pan gasket set $29.00
5.1102 ---- Oil dipstick $55.00
5.1200 ---- Oil pump
5.1200 ---- Oil pump, Reconditioned INQUIRE
5.1300 Oil strainer
GROUP
5.1300 ---- Oil strainer and float assembly $95.00
5.1301 ---- Oil strainer and float mount INQUIRE
5.1400 Piston
(check availability before boring the block)
GROUP
5.1400 ---- Piston with pin, standard, or .020", .030", .040", .060" oversize $39.00
5.1401 ---- Piston pin, standard or oversize .003",.005", .010", each $9.00
5.14005 ---- Piston Ring set
Please specify ring oversize, and piston ring groove widths
5.14025 ---- Piston ring set, standard, or .020", .030", .040", .060" oversize $76.00
5.1504 ---- Snubber
5.1504 ---- Snubber insulator set of 4 $38.00
5.1552 ---- Side stabilizer
5.1552 ---- Side stabilizer, 1941-50, 2 per car, each $58.00
5.16005 Motor mounts
GROUP
5.1603 ---- Motor mount, front 2 pieces, $55.00
5.1609 ---- Transmission mount, each $74.00
5.1700 Valves
GROUP
5.1700 ---- Valve, exhaust or intake 1940 only, each $28.00
5.1700 Valve, exhaust or intake, 1941-50, each $24.00
5.1701 ---- Valve cover good used $50.00
5.17015 ---- Valve cover gasket set $28.00
5.1706 ---- Valve spring $4.50
5.1707 ---- Valve key (lock), 1940, each inquire
5.1707 ---- Valve key (lock), 1941-50, set (32 pieces) $22.00
5.1710 ---- Valve guide, intake or exhaust $8.80
5.1715 ---- Valve lifter hydraulic plunger, new, each. (set of 16 $276) $20.00
5.1800 Vibration damper
GROUP
5.1800 ---- Vibration damper rebuilt Exchange only $345 - See Note #1
5.1900 ---- Water pump and fan
GROUP
5.1900 ---- Water pump, new $145.00
5.1912 ---- Water pump impeller $45.00
5.1928 ---- Fan blade INQUIRE
5.1929 ---- Fan belt, 1948-50 $60.00
5.1930 ---- Fan pulley $195.00
Access ---- Engine accessories
Access ---- Head chrome acorn nut and washer set, 8 cylinder, 38 pair $170.00
Access ---- Engine enamel green, quart (includes $13.20 hazardous material shipping
charge) $29.00
Access ---- Engine enamel gray, quart for most 23rd Series (includes $13.20 hazardous
material shipping charge) $29.00
5.999 ---- Engine decal set (oil filler cap, oil filter and air cleaner) $29.00
*
Engine Re-bore Kit
Engine Re-Bore kit for all 1940-50 9 main bearing 8 cyl. engines.
Includes:
• oil pump kit
• 8 pistons with pins and clips
• ring set
• freeze plug set
• overhaul gasket set
• valve springs
• engine pre-lube
• quart of engine enamel
---- When ordering, indicate cylinder bore size
$500.00 plus shipping (Check availability before boring the block)
---- Upgrade your Re-Bore kit
---- to include our timing chain
---- and gear set.
Add $192.50 (reg.$236.50)
Order Form
Top of Page
View Packard 1940-1950 Parts Index
EXHAUST PARTS ---- Group 6 ----
Please inquire for any Exhaust parts not listed below
No C.O.D. orders for exhaust systems, prepaid orders only
GROUP
6.000 ---- Muffler $180.00
6.001 ---- Tail pipe $125.00
6.003-8 ---- Exhaust system hangers INQUIRE
6.100 ---- Exhaust pipe $95.00
6.1025 ---- Exhaust pipe hanger, most models available $55.00
6.108 ---- Exhaust pipe flange gasket $14.00
6.200 ---- Exhaust system, includes: muffler, 2 pipes, gasket. $375.00
6.200 ---- Stainless steel exhaust system, includes: muffler, 2 pipes, gasket $740.00
Access. ---- Exhaust deflector, stainless steel universal type $32.00. Packard style $39.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
FENDERS AND RUNNING BOARD ---- Group 7 ----
GROUP
7.000 ---- Front fender (See 30.770 for 1942-47 Clipper)
7.000 ---- Front fender, many new and used available INQUIRE - See Note #2
7.011 ---- Splash panels INQUIRE
7.0075 ---- Front fender grille left, 1941 used (Note: price is based on fair condition
grilles, check price for better condition grilles) See 11.3001 for 1940 models $188.00
7.021 ---- Trim strip, front or rear fender, 1941-42 Except Clipper, (good used $30,)
each $45.00
7.121 ---- Fender welt, lacquered cloth over cotton bead, 3/16", per foot $2.50
7.200 ---- Running board rubber matting,1940 with 127" wheelbase, pair $785.00
7.200 ---- Running board rubber matting,1940 with 148" wheelbase, pair $942.00
7.200 ---- Running board rubber trim strip set, 1940 with 148" wheelbase $750.00
7.207 ---- Running board molding, new old stock, 1941 models 1903-06 other models
Inquire, each $110.00
7.207 ---- Running board molding, reproduction, 1941, pair $150.00
7.207 ---- Running board molding clip set $30.00
(30.8135) Floor side sill molding, 1942-7 Clipper, most models, reproduction,
pair INQUIRE
Order Form
Top of Page
View Packard 1940-1950 Parts Index
9.100 Carburetor
GROUP
9.1001 ---- Carburetor, Stromberg, 2bbl, 1940-42 rebuilt, Exchange only $275.00 - See Note #1
9.1001 ---- Carburetor, Carter 2bbl, rebuilt, 1942-47 Clipper, 1948-50
Exchange only $295.00 - See Note #1
Note When returning carburetor core, prior to
receiving rebuilt unit, remove brass fuel and vacuum line fitting.
These hardware items are not included on rebuilt units. PACK CAREFULLY
9.101 ---- Carburetor gasket set, specify carburetor number $29.00
9.102 ---- Air cleaner assembly INQUIRE
9.1131 ---- Starter switch on carburetor 1942-47 Clipper, 1948-50 (Good used $98.00) $195.00
9.1135 ---- Carburetor repair kit, specify carburetor number, 2 barrel Stromberg or
Carter $55.00
9.1135 ---- Carburetor major rebuild kit, some kits available for Stromberg, or Carter
INQUIRE
9.11355 ---- Carburetor control
Most linkage available, new and used INQUIRE
GROUP
9.11355(012) ---- Gas pedal kit, ribbed, 1940 (includes pedal, bracket and hardware) $55.00
9.11355(012) ---- Gas pedal, ribbed, 1941-50 $55.00
Note The linkage as follows applies to Clipper models only,
Inquire for 1940-42 non-Clipper models
9.11362 ---- Accelerator push rod to carburetor linkage $47.00
9.11364 ---- Rod to cross shaft linkage assembly $35.00
9.11366 ---- Accelerator pedal retracting spring $38.00
9.11367 ---- Gas pedal seal, 1942-47 Clipper, 1948-50 (round fiber disk) $8.00
9.11371 ---- Accelerator relay lever $42.00
9.11372 ---- Accelerator shaft and bracket assembly $75.00
9.135 ---- Throttle operating rod linkage $46.00
9.1415 ---- Cross shaft linkage assembly, (mounts over cylinder head) $74.00
9.200 Fuel pump
GROUP
9.200 ---- Fuel pump, 1940-42 Except Clipper, 1948-50 double action, $150 deposit
$125.00 - See Note #1
9.200 ---- Fuel pump, 1942-47 Clipper, single action, $59 deposit $97.00 - See Note #1
9.200 ---- Fuel pump, 6V electric replacement, with instruction, filter, bracket and
hardware kit $155.00
Note: When returning fuel pump core, prior to receiving rebuilt unit, remove brass fuel line fitting and the two
mounting bolt spacers. These hardware items are not included with rebuilt fuel pumps.
9.300 ---- Fuel tank
Inquire for good used and new Fuel Tanks
GROUP
9.300 ---- Fuel tank rebuilt, Exchange or add $375 deposit - See Note #1 and - See Note #2 at end of
list INQUIRE
(4.0600) ---- Gas tank sending unit rebuilt, Exchange only $185.00 - See Note #1
9.302 ---- Gas cap 1940 replacement $26.00
9.302 ---- Gas cap 1941-50 $26.00
9.3051 ---- Gas tank filler neck grommet, 1940 $22.00
9.306 ---- Gas tank strap, universal (Inquire for new old stock) $13.00
9.307 ---- Gas tank strap pad set, 1948-50 $44.00
9.406 ---- Fuel line hose, (flexible neoprene type hose, connects steel line to fuel
(pump) 1940-48 all,
1949-50 23rd series with brazed connector on steel line (has swivel
female end) $33.00
9.406 ---- Fuel line hose, (flexible neoprene type hose, connects steel line to
fuel pump) 23rd series with flared end gas tube (has fixed
female end) $49.00
Access ---- Gas tank sealer (quart) $40.00
Access ---- Fuel filter with glass bowl $35.00
(See 4.0200 for Clocks, 4.0600 for Dash Gauges)
Order Form
Top of Page
View Packard 1940-1950 Parts Index
INSTRUMENTS ---- Group 10 ----
Please inquire for any Instrument board parts not listed below
10.001 ---- Ash tray
10.001 ---- Ash tray, most years available, new & used INQUIRE
10.021 ---- Glove box door
GROUP
10.029 ---- Glove box lock cylinder and knob assembly, 1940 only (Inquire for
other years) $58.00
10.0483 ---- Dash knob, 1942-47 Clipper, 1948-50, each $52.00
10.066 Gauges
GROUP
10.066 ---- Oil gauge, 1940 INQUIRE
10.0913-915 ---- Temperature gauge and tube rebuilding service, 1940-47 (yours
rebuilt) - See Note #1 $179.00
10.0915 ---- Temperature gauge and tube assembly, 1942-47 Clipper only New (brown)
Exchange or add $5.00 deposit $285.00 - See Note #1
NEW Dash knobs 1940, reproduction, each $20.00
NEW Dash knob 1941 models $39 ea, 5 piece set, (Throttle, lighter,
lights, starter and instrument) $175.00
NEW 1941 models: Ashtray lid $80.00, Ashtray Surround 475.00, Clock surround, Speedometer surround, each $275.00
NEW 1941 models: Radio speaker grill $895.00
NEW 1941 complete dash plastic reproduction $1675.00
Advise color: beige, black, blue, brown, dark green, white, gray, ivory, maroon, red or tan.
10.100 Speedometer
GROUP
10.100 ---- Speedometer, 1941-42 Except Clipper INQUIRE
10.100 ---- Speedometer, 1942-47 Clipper only, most models (good used $115.00) $255.00
10.100 ---- Speedometer, 1948-50, good used cleaned and checked, without trip odometer $365.00
10.100 ---- Speedometer, 1948-50, good used cleaned and checked, with trip odometer $480.00
10.127 ---- Speedometer cable and housing $110.00
10.127 ---- Speedometer cable shaft kit INQUIRE
10.130 ---- Speedometer cable to dash rubber grommet, 1942-47 Clipper $10.00
For other instrument board gauges, see group 4
Order Form
Top of Page
View Packard 1940-1950 Parts Index
Please inquire for any Radiator parts not listed below
GROUP
11.001 ---- Radiator cap, 1942-47 Clipper with “No Pressure type” only $33.00
11.001 ---- Radiator cap, 7lb pressure cap $36.00
11.003 ---- Radiator - INQUIRE - See Note #2
11.0114 ----Radiator cradle to frame grommet set of 4, 1942-47 Clipper $60.00
11.012 ---- Radiator drain cock $30.00
11.0122 --- Radiator hose set, 1940 $45.00
11.0122 ---- Radiator hose set, 1941-50 $59.00
11.0122 ---- Radiator hose clamps set, correct original style $42.00
11.0122 ---- Radiator lower hose replacement (replaces the 2 rubber and 1 steel hose) $36.00
11.013 ---- Radiator hose, lower metal, (check for availability) $79.00
Access ---- Heater hose and clamp set $46.00
11.100 Radiator Shell
GROUP
11.100 ---- Radiator shell, 1940-42, Except Clipper INQUIRE
11.104 ---- Hood ornament, deluxe, 1940-42, (Except Clipper) Cormorant or Goddess,
reproduction INQUIRE
11.200 ---- Shutter
11.202 ---- Shutter blade for models equipped with radiator shutter thermostat INQUIRE
11.205 ---- Shutter rivet set (for movable shutter blades only) $20.00
11.300 Grille
GROUP
11.3001 ---- Radiator grille, 1940, left or right, used (Note: price is based on
fair condition grilles needing plating, check price for better
condition grilles) See 7.0075 for 1941 models $112.00
For 1942-47 Clipper front fender side grille, SEE 30.779
Order Form
Top of Page
View Packard 1940-1950 Parts Index
Please inquire for any Rear axle parts not listed below
12.000 Carrier differential
GROUP
12.000 ---- Differential bearing, each $69.00
12.001 ---- Differential carrier assembly with gears, good used, most models
available INQUIRE - - See Note #2
12.0015 ---- Differential carrier, new and used less gears INQUIRE
12.003 ---- Differential housing gasket $20.00
12.005 ---- Ring and pinion set,new old stock 4.09 to 1 $525.00
12.005 ---- Ring and pinion set, all ratios except 4.09 to 1 INQUIRE
12.0105 ---- Differential pinion bearing, front or rear $69.00
12.012 ---- Pinion seal $42.00
12.0161 ---- Universal joint flange, most models available (good used $60.00) $95.00
12.018 ---- Differential gears, and pinion gears each. $88.00
12.0194(035) ---- Thrust block $65.00
12.020 ---- Differential pinion thrust washer $29.00
12.022 ---- Differential gear thrust washer, specify thickness $27.00
12.023 Case and shaft assembly
GROUP
12.029 ---- Rear axle shaft, all except commercial chassis, (good
used $155.00) $245.00
12.029 ---- Rear axle shaft, commercial chassis only, good used $285.00
12.0295 ---- Rear axle shaft bearing $75.00
12.0313 ---- Rear axle shaft seal kit, two sides (includes 4 seals and mounting
gaskets) $75.00
12.0315 ---- Rear axle shaft bearing seal, each $23.00
12.0317 ---- Rear axle seals and bearing kit, (includes: pinion seal, axle; shaft
bearings, 4 seals and gaskets) $245.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
SHOCK ABSORBER and STABILIZER---- Group 13 ----
Please inquire for any Shock absorber and Stabilizer parts not listed below
Note Prior to sending your core front shock absorber, please remove the camber adjusting
pilot & washer on the end of each shock arm. Also note that front shocks with no damping
or frozen arms may not be rebuildable. Non-rebuildable shock cores add additional $200.00.
Please call if you have any questions.
GROUP
13.000 ---- Shock absorber, front, Except: 1803-06, Exchange or add $150 deposit
$199.00 - See Note #1
13.001 ---- Shock absorber, rear, 1940-42 except Clipper, Exchange only $179.00 - See Note #1
13.001 ---- Shock absorber, rear, tube-type $59.00
13.1001 ---- Stabilizer bar assembly 1940-47 INQUIRE
13.105 ---- Stabilizer bar link kit, 1948-50 2 sides $25.00
13.113 ---- Stabilizer bar assembly, front, 1948-50 INQUIRE
13.114 ---- Stabilizer bar mounting bushing each $12.00
13.1164 ---- Stabilizer (rear) hydraulic, 1942-47 Clipper, 1948-50 inquire
Order Form
Top of Page
View Packard 1940-1950 Parts Index
Please inquire for any Spring parts not listed below
GROUP
14.000 ---- Front coil springs, pair (advise if car is equipped with sidemount
tires) $295.00
14.002 ---- Front spring compression (lower) rubber bumper,1940-42 Except Clipper,
pair $125.00
14.002 ---- Front spring compression (lower) rubber bumper, all 1942-7 Clipper,pair $85.00 1948-50,
pair $65.00
14.006 ---- Compression bumper clip, each $9.00
14.009 ---- Rebound (upper) rubber bumper pair 1940-42 (except 1803-06, Clipper) $72.00
14.009 ---- Rebound (upper) rubber bumper pair 1803-06, 1942-47 Clipper, 1948-50 $58.00
14.100 ---- Rear leaf spring, pair, reproduction $750.00
14.105 ---- Rear leaf spring bushing kit, 1940 1803A-4-5-7-8 only, (6 bushing set) $66.00
14.105 ---- Rear leaf spring bushing kit, all except 1803A-4-5-7-8 (12 bushing set) $66.00
14.110 ---- Rear leaf spring separator kit, 1940-47, 1948-49 22nd series $60.00
14.114 ---- Rear leaf spring bumper, 1940, each $40.00
14.114 ---- Rear leaf spring bumper, 1941-50, each $45.00
14.1170 ---- Shackle kit, includes: shackles and bushings (both sides) most models
available $195.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
STEERING and SUSPENSION ---- Group 15 ----
Please inquire for any Steering& Suspension parts not listed below
15.000 ---- Steering connecting rod
GROUP
15.000 ---- Connecting rod (draglink) new and used INQUIRE
15.0071 ---- Idler arm (with rubber and metal bushing,) 1942-47 Clipper, 1948-50 $228.00
15.0074 ---- Idler arm bushing, 1942-47 Clipper, 1948-50 $37.00
15.00746 ---- Idler arm frame bracket and bushing, 1942-47 Clipper, 1948-50 with threaded
metal bushing $60.00
15.100 ---- Steering crank (Center steering Idler Arm 1940-42 Except Clipper)
15.100 ---- Center steering arm, 1940-42, Except Clipper, good used (Inquire for new),
single bushing type $245.00
15.105 ---- Center steering arm pin, 1940-42 Except Clipper, Hex head type $58.00
15.105 ---- Center steering arm pin spring washer, 1940-42 Except Clipper $19.00
15.105 ---- Center steering arm pin nut, 1940-42 Except Clipper $20.00
15.106 ---- Center steering arm bushing 1940-42 Except Clipper $59.00
15.200 Steering cross tube
GROUP
15.2005 ---- Tie rod assembly, inner, 1942-47 Clipper, 1948-50 $17.00
15.202 ---- Tie rod end, inner, 1940-42 Except Clipper, each.. Specify left or right
hand thread $27.00
15.202 ---- Tie rod end, outer, all, each. Specify left or right hand thread $27.00
15.2025 ---- Adjusting sleeve, 1940-42, good used, Except Clipper $93.00
15.2025 ---- Adjusting sleeve, 1942-47 Clipper, 1948-50 $22.00
15.310 ---- Steering gear assembly
GROUP
15.3076 ---- Steering column to instrument board collar grommet, 1941-42 Except
Clipper $42.00
15.310 ---- Steering gear box assembly, good used INQUIRE
15.310 ---- Steering gear box rebuilding service (call for details) $595.00
15.318 ---- Steering gear box cross shaft 1946-50 $229.00
15.320 ---- Cross shaft bushings, pair $52.00
15.321 ---- Pitman arm, 1940-42 except Clipper, good used $189.00
15.321 ---- Pitman arm, 1942-47 Clipper, 1948-50 $185.00
15.3222 ---- Pitman arm rubber bushings, 1941-42 except Clipper, pair $28.00
15.3225 ---- Steering gear box (cross shaft) lower oil seal $28.00
15.329 ---- Shaft and worm assembly 1942-47 Clipper, 1948-50 check availability $475.00
15.3295 ---- Steering gear box upper bearing $48.00
15.3305 ---- Steering gear box upper oil seal $24.00
15.3315 ---- (3317)Steering gear box worm bearing lower race (2 required per steering
box) $49.00
15.3316 ---- Steering gear box worm bearing cone (2 required per steering box) $49.00
15.3316 ---- Steering gear box worm bearing and seal kit (2 races, 2 cones and 2
seals) $195.00
15.333 ---- Steering wheels, used INQUIRE
15.400 Steering knuckle
GROUP
15.400 ---- Steering knuckle used, 1940-42 most models except Clipper and commercial chassis $228.00
15.400 ---- Steering knuckle, 1942-47 Clipper, 1948-50 except commercial chassis and 2126 (used, $175.00) $235.00
15.401 ---- Steering knuckle bearing adjusting nut, each $24.00
15.402 ---- Steering knuckle bearing adjusting nut washer, each $20.00
15.404 ---- Front wheel bearing, inner or outer $60.00
15.404 ---- Front wheel bearing and seal kit, Except Commercial series (2 seals and
4 bearings) $249.00
15.406 ---- Steering knuckle lever, each $40.00
15.408 ---- King pin kit, 2 sides 1940, except commercial series $130.00
15.408 ---- King pin kit, 2 sides 1941-50, except commercial series $105.00
15.408 ---- King pin kit, 2 sides, Commercial series (Hearse and Ambulance) $285.00
15.501 Steering knuckle support
GROUP
15.501 ---- Steering knuckle support, 1935-42 Except Clipper INQUIRE
15.501 ---- Steering knuckle support, 1942-47 Clipper (used $105.00)
except Commercial series (1941 Clipper, Inquire) $190.00
15.502(514) ---- Lower control arm, (used $144.00) $220.00
15.5035 ---- Lower inner bushings, 1942-47 Clipper, 1948-50, 2 sides $75.00
15.5035 ---- Lower inner shaft and threaded bushing assembly, 1942-47 Clipper,
1948-50, 1 side $87.00
15.50515 ---- Lower outer pin and bushing kit (2 sides) 1940-42 Except Clipper $120.00
15.506 ---- Lower inner bushings, 1940-42 Except Clipper, set of 4 $42.00
15.510 ---- Upper outer bushing set, 1940-42 Except Clipper $55.00
15.511 ---- Upper outer pilot & washer, (camber adjuster), 1940-42 Except Clipper,
specify offset $49.00
15.5131 ---- Lower outer pin kit, 1942-47 Clipper, 1948-50, 1 side $49.00
15.5131 ---- Upper outer pin kit, 1942-47 Clipper, 1948-50, 1 side $60.00
15.515 ---- Torque arm assembly, 1940-42 Except Clipper $82.00
15.516-7 ---- Torque arm ball or bushing, 1940-42 Except Clipper, 1 side $24.20
15.518 ---- Torque arm shim (caster adjuster), 1940-42 Except Clipper,
specify ½ degree or 1 degree $38.00
Front End Kits
Front end kits 1940-50 include: 2 outer tie rod ends, king pin kit, lower inner bushings,
upper and lower outer pin kits, torque arm bushings,
stabilizer link kit as required.
GROUP
15.999 ---- Front end kit, Standard, 1940-50 all except Commercial chassis $390.00
15.999 ---- Front end kit, Standard, 1940-50 Commercial chassis and 2126 $540.00
15.999 ---- Front end kit, Deluxe, 1942-47 Clipper, 1948-50 with lower inner shafts $475.00
Please inquire for any Trunk Rack parts not listed below
17.000 ---- Trunk rack - INQUIRE - See Note #2
17.000 ---- Trunk, Original Packard Accessory, price based on condition
- See Note #2 from $235.00 to $470.00
17.004 ---- Trunk rack clamp screw (winged knob) INQUIRE
17.010 ---- Trunk rack acorn nut set of 4 $40.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
UNIVERSAL JOINT ---- Group 18 ----
Please inquire for any Universal joint parts not listed below
GROUP
---- 18.013 Drive shaft, new and used INQUIRE
---- 18.0152 Universal joint 1940-42, Except Clipper, with 4 winged bearings $93.00
---- 18.0152 Universal joint 1942-47 Clipper, 1948-50, with 4 round bearings $65.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
WHEELS ---- Group 19 ----
Please inquire for any wheel parts not listed below
GROUP
19.000 ---- Wheel 16", good used INQUIRE
19.000 ---- Wheel 15", good used $187.00
19.000 ---- Wheel bolt $6.00
19.001 ---- Wheel, front, grease cap, used $38.00
19.001 ---- Wheel, front, grease cap, new (check for availability) $50.00
19.0015 ---- Front wheel grease seal, Except Commercial chassis $24.00
19.0015 ---- Front wheel grease seal Commercial chassis $36.00
19.002 ---- Hub cap 1940 160, 180 #348386production exactly as original $85.00 4 for $288.00
19.002 ---- Hub cap 1940-42 Except Clipper, used, fair to good condition
From $45.00 to $135.00
19.002 ---- Hub cap large, 1942-47 Clipper, 1948-50, used $99.00
Note The above hubcaps represent a selection of good used, we also
offer hubcaps requiring more work to restore and some new old stock, inquire for pricing.
19.003 ---- Hub cap clip $19.00
19.003 ---- Hub cap clip rivet, set of 5 $8.00
Access. Side mount mirror, notched or flat bottom base, pair,
(Head engraved “PACKARD”) $180.00
Access. Trim ring, 15" or 16", reproduction stainless steel, each $33.00
Order Form
Top of Page
View Packard 1940-1950 Parts Index
BODY EQUIPMENT ---- Group 30, 31 ----
Please inquire for Body parts not listed below
GROUP
30.007 ---- Ash tray, assemblies, parts new & used INQUIRE
30.007 ---- Ash tray handle, 1940-47, reproduction $25.00
30.022 ---- Rear view interior mirror, 1940-42 Except Clipper replacement reproduction $135.00
30.022 ---- Rear view interior mirror 1942-47 Clipper, 1948-50 $135.00
30.045 ---- Body belt molding
We have available new old stock belt molding for most 1941-47 Clippers and 23rd series. INQUIRE
30.100 Body hold down
GROUP
30.1004 ---- Body hold down cushion, high density, special fabric replacement, 2 foot
strip, enough to do the complete car (you must cut into sections and drill
mounting holes) $20.00
30.200 ---- Cowl
GROUP
30.201 ---- Hood lacing kit with rivets, 1940-42, Except Clipper $45.00
Note: Front and rear door parts are listed together. Group reference numbers are FRONT and REAR respectively
30.295-435 Doors, front and rear
GROUP
30.295 ---- Door INQUIRE - See Note #2
30.3005 ---- Door arm rest, 1942-47 Clipper, 1948-50, used $73.00
30.319-30.446 ---- Door hinge
30.310 ---- Door hinge upper, lower; 1942-47 Clipper, 1948-50 (check availability) $179.00
30.319-449 ---- Door lock assembly. and parts
GROUP
30.319 ---- Door latch assembly INQUIRE
30.3195 ---- Door lock cylinder, any lock $36.00
30.3195 ---- Door lock cylinder parts available INQUIRE
30.3227 ---- Door lock cylinder key, blank $7.00
30.326 ---- Door handle, exterior 1940-42 Except Clipper INQUIRE
30.326 ---- Door handle, exterior, 1942-47 Clipper (good used $95.00) $195.00
30.226 ---- Door handle, exterior, 1948-50 INQUIRE
30.3227 ---- Door lock knob, advise color $14.00
30.328 ---- Door handle gasket, 1940-42 Except Clipper, pair $20.00
30.332 ---- Door handle, interior, 1940-42 INQUIRE
30.332 ---- Door handle, interior, 1942-47 Clipper $68.00, 1948-50 $57.00
30.334 ---- Door and window handle plastic escutcheon, 1940-50, colors available $14.00
30.341 ---- Door latch striker, dovetail, 1940-42 Except Clipper INQUIRE
30.341 ---- Door latch striker assembly, 1942-47 Clipper, 1948-50 (Except left front,
Inquire) $82.00
30.3439 ---- Door trim panel clip, set of 20 $20.00
30.344 ---- Door weatherstrip, replacement, per foot (50 foot roll, $99.00) $2.95
30.344 ---- Door weatherstrip, reproduction of original, 1940-42, Except Clipper,
per foot (see figure 1, #1) $4.75
30.344 ---- Door weatherstrip, reproduction of original, 1942-47 Clipper, 1948-50,
per foot (see figure 1, #2) $4.05
30.344 ---- Front door hinge pillar weatherstrip, 1942-47 Clipper, pair $163.00
30.344 ---- Front door hinge pillar weatherstrip, 1948-50, pair $163.00
KIT Door weatherstrip kits see weatherstrip kit page for detailed information
Note: Each kit contains: hinge pillar weatherstrips and
weatherstrip for the door perimeter.
Kit ---- Front door weatherstrip kit, 1942-47 Clipper $250.00
Kit ---- Front or rear door weatherstrip kit, 1948-50, each $250.00
30.35125- 30.4761 Door window
GROUP
30.35125 ---- Window regulator for hydraulic powered windows, 1948-50 INQUIRE
30.35127 ---- Window cylinder, hydraulic, 1948-50, each $194.00
30.352 ---- Window dust seal 1940-50, pair with chrome bead 7/16" width $29.00
30.352 ---- Window dust seal 1942-47 Clipper, 1948-50, pair without chrome bead, 9/16" width $45.00
30.366 ---- Window glass, 1942-47 Clipper, 1948-50 sedan $135.00
30.366 ---- Window glass, 1942-47 Clipper and 1948-50 2 door $166.00
30.386 ---- Window regulator 1940-42 Except Clipper $150.00
30.386 ---- Window regulator 1942-47 Clipper, 1948-50 $115.00
30.388 ---- Window handle, interior, 1942-47 Clipper, 1948-50
(good used $55.00) $85.00
30.388 ---- Window crank knobs, reproduction, 1940-42 Except Clipper, Chrome
target and base, each $50.00
30.388 ---- Window crank knobs, reproduction, 1940-42 Except Clipper, Chrome
target and base, set of 8 $350.00
30.388 ---- Window crank knob, 1942-47 Clipper, 1948-50, each $24.00
30.3963 ---- Window runway channel, flexible, sedans only, 1 per window,
each $30.00
30.3963 ---- Window vertical runway channel, rigid, specify front or rear,
pair $55.00
30.401-550 ---- Door window wing (vent window)
30.404 ---- Window wing glass, 1942-47 Clipper, 1948-50 $60.00
30.408 ---- Window wing assembly., chrome frame INQUIRE
30.410 ---- Window wing handle, 1942-47 Clipper, 1948-50 $40.00
30.4205 ---- Vent window handle escutcheon, plastic, 1940-42 Except Clipper,
reproduction, each $15.00
30.433 ---- Vent window weatherstrip, Front, 1940-47, 1948-50 Except
Convertible, pair $150.00
30.433 ---- Vent window weatherstrip, Front, 1948-50 Convertible,
pair $225.00
30.433 ---- Vent window vertical weatherstrip 1940-42 Except Clipper,
(1 strip seal 2 vent windows) $15.00
30.433 ---- Vent window vertical weatherstrip 1942-47 Clipper, 1948-50,
front or rear, pair $36.00
30.5605 ---- Vent window weatherstrip rear, 1942-47 Clipper, 1948-50,
pair $173.00
30.580 Electrical Courtesy and License light
GROUP
30.61125 ---- Courtesy, dome lights & parts INQUIRE
30.634 ---- License light assembly, bracket, parts INQUIRE
30.635 ---- License light to body mounting gasket, (for 1940 with
“PACKARD” lens) $60.00
30.635 License light to body mounting gasket, 1941-42 Except
Clipper, with
license light and trunk handle $22.00
30.6355 ---- License light to bumper mounting gasket, 1942-47 Clipper,
1948-50 $30.00
30.650 ---- License light lens, 1940-42 Except Clipper, half round
type glass $45.00
30.650 ---- License light lens, 1942-47 Clipper, 1948-50 rectangular,
reproduction $59.00
30.700 ---- Windshield wiper 1942-47 with electric wiper system
(see 31.370 for 1935-39 vacuum system)
GROUP
30.7085 ---- Wiper blade $49.00
30.709 ---- Wiper arm, specify left or right Subject to availability $110.00
30.765 ---- Electric wiper system motor, linkage, parts etc. INQUIRE
30.770 ---- Front fender 1942-47 Clipper, 1948-50
GROUP
30.770 ---- Front fender new and good used - INQUIRE - See Note #2
30.779 ---- Front fender side grille, good used, left or right $245.00
30.780 ----Front fender grille extension side moldings INQUIRE
30.7815 ---- Packard script, 23rd series, each $115.00
30.790 ---- Rear fender 1942-47 Clipper, 1948-50
GROUP
30.791 ---- Gas filler door $89.00
30.7912 ---- Gas filler door bumper set $9.00
30.7918 ---- Gas filler door spring, each $23.00
30.793 ---- Fender skirts, pair, 1948-50 INQUIRE
30.8005 Floor
GROUP
30.8005 ---- Floor pan reproduction, rear, left or right, 1940-42 except Clipper, each, $120.00
30.8005 ---- Floor pan reproduction, rear, left or right, 1941-47 Clipper, 1948-50, each, $110.00
30.8007 ---- Floor pan reproduction, front, left or right, 1940-42 except Clipper, each, $200.00
30.8007 ---- Floor pan reproduction, front, left or right, 1941-47 Clipper, 1948-50 each, $130.00
30.806 ---- Door sill plate set 1940-42 2 door, most models, aluminum $415.00
30.806 ---- Door sill plate set 1940-42 4 door, most models, aluminum $445.00
30.8105 ---- Door sill rubber step plate set, 1942-47 Clipper, 1948-50 INQUIRE
30.8135 ---- Floor side sill molding, 1942-47 Clipper
(Except 2126) pair $490.00
30.814 ---- Rocker repair panel set, 1942-47 Clipper, 1948-50, (2 inner, 2 outer) 2 door models $169.00
30.814 ---- Rocker repair panel set, 1942-47 Clipper, 1948-50, (2 inner, 2 outer) 4 door models $181.00
30.8145 ---- Rubber push-in fastener for firewall insulation panel, each $3.00
30.8231 Fresh air duct parts
Fresh air duct parts, most available inquire for specific parts
GROUP
30.8232 ---- Fresh air duct cable assembly, 1942-47 Clipper, 1948-50 $75.00
30.82492 ---- Hydraulic system
GROUP
30.82494 ---- Hydraulic motor and pump rebuilding service INQUIRE
30.842942 ---- Hydraulic motor and pump mount, each $15.00
30.874 ---- Radiator grille and splashers
GROUP
30.874 ---- Grille, 1942-47 Clipper, used (price determined by condition)
$255.00 - $565.00
30.874 ---- Grille, 1948-50 INQUIRE
30.8749 ---- Splashers INQUIRE
30.8989 ---- Front seat
GROUP
30.927 ---- Seat handle 1942-47 Clipper, 1948-50 Note: Has “round” mounting
area $55.00
30.927 ---- Seat handle 1942-47 Clipper, 1948-50 Note: Has “rectangular”
mounting area INQUIRE
30.92784 ---- Seat, front hydraulic cylinder 1948-50, each $194.00
30.930 ---- Seat track, 1942-47 Clipper, 1948-50 check availability $75.00
31.000 Top folding
GROUP
31.000 ---- Top, convertible assembly, bows etc, INQUIRE - See Note #1
31.01514 ---- Tacking strip 10' section, front 3/16" X 5/8", or
rear 5/16" X 1/2" $28.00
31.0749 ---- Side rail weatherstrip (see figure 2, #1) per foot $5.00
31.0749 ---- Side rail weatherstrip (see figure 2, #2) per 12 foot strip $114.00
31.0749 ---- Side rail weatherstrip (see figure 2, #3) per 12 foot strip $105.00
31.106 ---- Top, valve control rod knob, reproduction $72.00
31.107 ---- Top, convertible, cylinder, 1948-50, each $184.00
Note The following convertible tops are for 2 door models only
Trim Vinyl convertible top, Supertex™, White/Black, Black/Black or
Tan/Black See Kanter Catalog $349.00
Trim Vinyl convertible top, Ultratex™, White/Black or Black/Black
See Kanter Catalog $449.00
Trim Canvas convertible top, Colortex™, Tan/Tan, Black/Black or
Blue/Tan See Kanter Catalog $649.00
Trim Chromed framed rear glass window, 7-1/2" X 21" $355.00
31.1502 Trunk (see Group 17 for Trunks and Trunk Rack)
GROUP
31.150 ---- Trunk pan lower section 1940-42 except Clipper $200.0
31.1500 ---- Trunk pan lower section 1948-50 $210.00
31.157 ---- Trunk lid, 1940-42 Except Clipper - INQUIRE - See Note #2
31.157 ---- Trunk lid assembly 1942-47 Clipper, 1948-50 - See Note #2 $388.00
31.164 ---- Hinge assembly, 1940-42 Except Clipper INQUIRE
31.164 ---- Hinge assembly, 1942-47 Clipper, 1948-50 good used, (new Inquire) $184.00
31.167 ---- Latch lock assembly, 1942-47 Clipper, 1948-50 $90.00
31.1672 ---- Lock cylinder $42.00
31.1679 ---- Lock cylinder key blank $7.00
31.169 ---- Lock case, dust cover, shaft, etc. INQUIRE
31.173 ---- Trunk handle, 1935-42 Except Clipper INQUIRE
31.1735 ---- Trunk handle, 1941-47 Clipper $98.00
31.190 ---- Weatherstrip, replacement, per foot $2.95
31.190 ---- Weatherstrip, reproduction, per foot (see figure 3, #1) per foot $4.80
31.190 ---- Weatherstrip, reproduction, per foot (see figure 3, #2) per foot $4.70
31.190 ---- Weatherstrip, reproduction, (see figure 3, #3) 14 ½ foot strip $82.00
31.190 ---- Weatherstrip, reproduction, 1942-47 Clipper, 1948-50 $65.00
31.225 ---- Ventilator (Cowl vent)
31.225 ---- Cowl vent INQUIRE
31.2286-2373 ---- Cowl vent parts INQUIRE
31.239 ---- Cowl vent gasket, 1940-47 $39.00
31.2792 ---- Rear quarter window
GROUP
31.2793 ---- Rear quarter window hydraulic cylinder, 1948-50, each $194.00
31.280 ---- Rear quarter window horizontal dust seal set, 7/16" pair $29.00 9/16" pair $45.00
31.287 ---- Rear quarter glass, 2 door and convertible, each $155.00
31.28732 ---- Quarter window leading edge seal, 1948-50 convertible only pair $74.00
31.345 ---- Quarter window weatherstrip, 1940 Except 1940 5 passenger touring
sedan, pair $174.00
31.345 ---- Quarter window weatherstrip, 1940 5 passenger touring sedan,
pair $182.00
31.345 ---- Quarter window weatherstrip, 1941 all Except Clipper, pair $172.00
31.345 ---- Quarter window weatherstrip, 1946-49 7 Passenger Sedans and
Limousine, pair $220.00
31.353 ---- Rear window
GROUP
31.353 ---- Window rear glass, 1942-47 Clipper and 1948-50 4 door sedan, good
used $225.00 - See Note #2
31.358 ---- Window rear weatherstrip, without reveal molding, 1940 all (Except
convertible) $144.00
31.358 ---- Window rear weatherstrip, with reveal molding, 1940 (Except
convertible) $138.00
31.358 ---- Window rear weatherstrip, 1941 all, with reveal molding $144.00
31.358 ---- Window rear weatherstrip, 1941 all, without reveal molding $138.00
31.358 ---- Window rear weatherstrip, 1942-47 Clipper, 1948-50 $152.00
31.366 ---- Stainless and chrome trim INQUIRE
31.3772 ---- Windshield wiper (cleaner) 1940-42 Vacuum system
(see 30.700 for 40-47 electric system)
GROUP
31.374 ---- Wiper driver assembly INQUIRE
31.3772 ---- Wiper pivot and cable, 1948-50 $79.00
31.3774 ---- Wiper cable tensioner, 1948-50 $49.00
31.379 ---- Wiper vacuum motor, 1940-42 Except Clipper, your motor rebuilt
(inquire for exchange availability) $179.00
31.379 ---- Wiper vacuum motor, 1948-50, Exchange or add $100 deposit
$179.00 - See Note #1
31.3794 ---- Wiper motor control cable, 1948-50 $93.00
31.3862 ---- Wiper blade 1940-42 $10.00
31.3862 ---- Wiper blade replacement 1948-50 $24.00
31.387 ---- Wiper arm 1940 (1941-42 Except Clipper, original, Inquire) $41.00
31.387 ---- Wiper arm, replacement 1941-42 Except Clipper $36.00
31.387 ---- Wiper arm chrome acorn nut, 1940 $12.00
31.3905 ---- Windshield
GROUP
31.397 ---- Windshield trim INQUIRE
31.406 ---- Weatherstrip, 1940-50 all $163.00
31.413 Trim
GROUP
31.417 ---- Carpet set, front and rear, 1940-50, inquire for samples, see Kanter catalog for information $219.00
31.458 ---- Headliner, inquire for samples (Limousine and 7 passenger $285.00) see Kanter catalog for information $235.00
31.474 ---- Seat upholstery kit, front and rear, inquire for samples, see Kanter catalog for information $375.00
31.474 ---- Seat upholstery kit pleated, front and rear, inquire for samples, see Kanter catalog for information $465.00
31.474 ---- Upholstery material, per yard, inquire for samples $25.000
Order Form
Top of Page
View Packard 1940-1950 Parts Index
33.000 ACCESSORIES
Bug screen set, 1948-50 Rare Packard Accessory $47.00
Exhaust pipe deflector stainless steel $32.00
Exhaust pipe deflector stainless steel reproduction of Packard exhaust deflector $39.00
Fender skirts, pair,1937-47 $250.00
Floor mats, reproduction of rare original accessory, 17"x21" $26.00, Set of 4 $97.00
Heater assembly, blower motor and parts INQUIRE
Foot warmer and defroster, dash mount, 1942-47 New Old Stock $95.00
Heater underseat unit, 1942-47 New Old Stock $129.00
Heater thermal valve 1948-50, rebuilt exchange only $135.00
Light, Fog light (amber) or Driving light (clear) with
brackets and Packard crests, 5" or 6" 6 volt, pair $189.00
Light, Spot light, left or right, 5" or 6", 6 volt, each,
with crest and bracket $259.00
License plate frame, chrome plated, adjustable, reproduction of original,
each $55.00
Mirror, sidemount, 1940-42, Except Clipper, specify if sidemount cover has
center stainless molding, pair $180.00
Mirror, exterior, 1942-47 Clipper, 1948-49 22nd series only, pair $385.00
Mirror, exterior, 1949-50 23rd series, pair $775.00
Oil filter assembly, uses replacement type filter, less lines $190.00
Radio, all models available, used as-is 1942-47 Clipper, 1948-50 $325.00
Radio, checked good working condition, 1942-47 Clipper, 1948-50 $625.00
Wheel trim ring, stainless steel reproduction, 15" or 16", each $33.00
Order Form
Top of Page
---------------------
Note #1 Packard Core Deposit Policy
All cores sent to us must be rebuildable or additional charges will apply.
The following requirements for an acceptable core or exchange unit is as
follows. NOTE: DISASSEMBLED CORES ARE NOT ACCEPTABLE.
CONDITION: The core must be in good condition. Any cores with broken parts, excessive rust or damage
are subject to a partial refund if the condition can be corrected. If core is beyond repair, no refund will be given.
Additional charges may apply.
COMPLETENESS: The core must be complete. Any missing parts will be deducted from the core value.
WEAR: If the core is worn beyond normal allowable standards and cannot be rebuilt, no refund will be
issued and core will be returned to you at your request. If core can be repaired, a partial refund will be
issued or additional charges may apply.
Note #2 Large Parts Crating and Shipping
Windshields, radiators, manifolds, rear ends, engine blocks, etc. may
require a crating charge. These items must be sent by truck, freight collect.
Please call for details if you are purchasing any of these items.