|
online catalog
key
word search
 
| |
Kanter Auto Products 76 Monroe St Boonton NJ 07005 USA
1-800-526-1096 or 1-973-334-9575
ULTRAMATIC REBUILDING KIT 1955-56
Your ULTRAMATIC transmission was a modern, well designed, good performing
unit when it was new. In the past 45-46 years, both time and mileage have taken
their toll on the performance and reliability of your ULTRAMATIC. We have
assembled rebuilding kits for all ULTRAMATIC. These kits will not only help
restore the transmission to its original condition, but will make it more
reliable than new. The bands and clutch (optional) are made of newly developed
materials as used in GM cars instead of the original cork. All critical seals
are of the highest quality butyl-neoprene material.
The Kit includes List Price
- Complete factory step-by-step service manual reprint $16.50
- 6 High range clutch friction plates $52.80
- 6 High range clutch steel plates. $66.00
- 1 Front oil seal $16.50
- 1 Rear oil seal $16.50
- 1 Selector shaft seal $13.20
- 1 Manual shift seal $13.20
- 1 Clutch piston lip seal $13.20
- 1 Complete gasket set $49.50
- 1 Bushing set $181.50
- TOTAL $438.90
KIT PRICE ONLY $38.5.00
LOW AND REVERSE BANDS
Bands are sold on an exchange basis.$82.50 each exchange or add $150.00
deposit each. See Note #1
DIRECT DRIVE CLUTCH
If your transmission slips in Direct Drive (over 30 mph) or groans into top
gear, your Direct Drive clutch has become hardened and lost it’s proper
friction quality. We can reline your Direct Drive clutch plate with modern GM
lining for $110.00 exchange, or add $150.00 deposit See Note
#1
OTHER PARTS
Add 15% for postage and handling in continental U.S.
($8.00 minimum, $60.00 maximum)
We have a complete stock of all ULTRAMATIC parts. If upon disassembly, other
parts are necessary for repairs, please call, fax, or write for a quotation or
to place an order. Some of the more common parts are listed as follows. See
Ultramatic transmission group illustration at end of list
Book Ultramatic service manual all 1955-56 $16.50
3.5062 Breather cap $38.50
3.508 Complete gasket set $55.00
3.511 Bell housing bushing $38.50
3.514 Front seal $16.50
3.518 Low brake assembly $126.50
3.519 Reverse brake assembly $154.50
3.520 Low or reverse band, (exchange or add $150.00 deposit) See Note #1 $82.50
3.5263 Brake band anchor pin (2 per trans) $27.50
3.5273 Low or reverse band lever pin $49.50
3.530 Reverse brake piston INQUIRE
3.542 Low brake piston seal $22.00
3.542 Reverse brake piston seal $22.00
3.555 High range clutch steel plate (6 per car), each $11.00
3.557 High range clutch friction plate (6 per car), each $8.80
3.559 Clutch housing assembly $258.50
3.559 Clutch housing assembly, good used $126.50
3.5591 Clutch housing bushing $19.80
3.560 Clutch hub $93.50
3.563 Clutch hub thrust washer $22.00
3.564 Clutch piston $115.50
3.5642 High range clutch lip seal $13.20
3.570 Clutch spring often neglected in a full trans rebuild! $27.50
3.572 Clutch thrust bearing, 1956 only $33.00
3.573 Clutch thrust washer, 1955 only $16.50
3.575 Valve body complete (good used $247.50), check for availability $550.50
3.57787 Manual valve lever, inner $71.50
3.57788 Manual valve lever shaft $93.50
3.577882 Selector shaft seal $13.20
3.587 Throttle shaft seal $13.20
3.600 Direct drive clutch (exch. or add $150.00 deposit) See Note #1 $110.00
3.601 Thrust washer for converter clutch to direct drive clutch $27.50
3.602 Converter clutch housing 1955 $165.00
3.602 Converter clutch housing 1956, good used INQUIRE
3.6021 Converter clutch housing bushing 1955, 2 per car $13.20 each; 1956 $26.40
3.60212 Converter clutch housing O-ring $9.90
3.60216 Converter clutch housing hub thrust bearing, 1956 only $49.50
3.603 Converter clutch piston 1955 $181.50
3.603 Converter clutch piston 1956, good used (new, inquire) $170.50
3.606 Converter clutch pressure plate $126.50
3.608 Converter pump 1955 (1956 inquire) $159.50
3.612 Converter pump shaft (exchange or add $50.00 deposit) See Note #1 $137.50
3.615 Converter reactor $137.50
3.616 Reactor shaft (exchange or add $55.00 deposit) See Note #1 $104.50
3.6163 Converter reactor shaft thrust washer $33.00
3.6165 Converter reactor shaft wave washer replacement kit (The use of the original wave washer will often result
in converter failure) $60.50
3.6173 Converter reactor thrust washer (two perpendicular tabs) $33.00
3.621 Converter 1st or 2nd turbine (good used $77.00) $181.50
3.6233 Converter first turbine hub thrust washer (specify thickness) $24.20
3.624 Front oil pump (exchange or add $137.50 deposit) See Note #1 $280.50
3.6245 Front oil pump bushing $38.50
3.6257 Front oil pump jumper tube, 2 per car, each $13.20
3.631 Front oil pump rotor kit $60.50
3.632 Governor assembly, low or high $82.50
3.636 Input shaft (exchange or add $75.00 deposit) See Note #1 $192.50
3.639 Transmission oil cooler, good used (new, inquire) $148.50
3.640 Oil filler dipstick $38.50
3.644 Oil pan assembly, good used $49.50
3.646 Oil pan gasket $13.20
3.648 Transmission oil filter, good used $82.50
3.6483 Output shaft 1955, (exchange or add $40.00 deposit) See Note #1 $137.50
3.6483 Output shaft 1956, good used only $82.50
3.649 Parking lock gear good used (new inquire) $93.50
3.6490 Parking lock $38.50
3.6492 Parking lock lever, reconditioned
(exchange or add $50.00 deposit) See Note #1 $82.50
3.650 Parking lock operating lever $55.00
3.6504 Parking lock operating lever stop pin $27.50
3.6542 Planetary cage and shaft assembly less gears $346.50
3.6542 Planetary cage and shaft assembly with gears, good used $225.50
3.6547 Planetary cage damper (3 per car), each $22.00
3.6552 Planetary pinion bearing roller set (228 rollers) $71.50
3.656 Planetary ring gear assembly (good used $192.50) $324.50
3.6561 Planetary ring gear bushing $19.80
3.6562 Planetary ring gear thrust washer $38.50
3.658 Planetary sun gear rear 1955 $49.50, 1956 $126.50
3.658 Planetary sun gear front $159.50
3.660 Planetary sun gear thrust bearing $33.00
3.662 Planetary sun gear thrust washer $22.00
3.664 Reactor sprag clutch includes two springs $170.50
3.667 Reactor hardened bearing plate, each (2 required) $44.00
3.67223 Reactor race $71.50
3.6726 Reactor clutch washer $16.50
3.6741 Rear housing bearing $33.00
3.6743 Rear housing bushing $19.80
3.678 Rear seal $16.50
3.679 Rear housing spacer $11.00
3.680 Rear pump (exchange or add $85.00 deposit) See Note #1 $247.50
3.6801 Rear pump bushing $33.00
3.6809 Rear pump rotor kit $71.50
3.681 Speedometer driving gear $60.50
3.685 Speedometer pinion and shaft (specify number to teeth or rear axle ration) $60.50
3.686 Speedometer pinion adapter (specify number to teeth on pinion and shaft or rear axle ratio) $38.50
3.999 Steel ring kit $137.50
3.999 Ultramatic rebuilding kit $385.00
3.999 Ultramatic bushing kit $181.50
All cores sent to us must be rebuildable or additional charges will apply.
The following requirements for an acceptable core or exchange unit is as
follows. NOTE: DISASSEMBLED CORES ARE NOT ACCEPTABLE.
- CONDITION: The core must be in good condition. Any cores with broken
parts, excessive rust or damage are subject to a partial refund if the
condition can be corrected. If core is beyond repair, no refund will be given.
Additional charges may apply.
- COMPLETENESS: The core must be complete. Any missing parts will be
deducted from the core value.
- WEAR: If the core is worn beyond normal allowable standards and cannot be
rebuilt, no refund will be issued and core will be returned to you at your
request. If core can be repaired, a partial refund will be issued or additional
charges may apply.
Windshields, radiators, manifolds, rear ends, engine blocks, etc. may
require a crating charge. These items must be sent by truck, freight collect.
Please call for details if you are purchasing any of these items.
Kanter Auto Products Home Page
 Kanter
Auto Products warrants that each item we sell is free from defects in
workmanship and materials for as long as you own your car.
For more information on our products and services, please e-mail
stu@kanter.com, phone us at
973-334-9575 or 800-526-1096, or FAX your request to 973-334-5423. If you have
problems or comments concerning our WWW service, please send e-mail to
webmaster1@kanter.com.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
This page, and all contents, are Copyright ©2005 by Kanter Auto
Products, 76 Monroe St, Boonton NJ 07005 USA 973-334-9575 or 800-526-1096, FAX
973-334-5423
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
|
